Wright Manufacturing Sentar Sport Lawn Mower Manuel du propriétaire

Commercial Mower Owner’s Manual For Stander X, Serial Numbers 54956 and Higher Until Superseded WARNING: READ THIS MANUAL BEFORE USING Revis

9 where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. (Drain fuel to a ½ tank when performing m

10 OPERATING INSTRUCTIONS If you are not completely familiar with the Safety Instruction Manual read it now before proceeding with the operation of

11 brake. The higher engine speed will make the controls much more responsive and the mower much quicker; Use caution if it is your first time. No

12 How to Adjust Neutral Neutral refers to the mower movement when the engine is set to full throttle, parking brake is off, and the control levers

13 How to Test/Use the Blade Clutch/Brake Switch Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing v

14 height of cut range after any adjustments are made to these hangers to ensure that the height of cut adjustments work properly. If unable to m

15 Spring platform Adjustment The factory setting is both springs set at the most forward position. The more rearward the spring position, the stif

16 port. Use fully synthetic oil: Mobil1 15W-50. With the bypass valves open and the engine running, slowly move the control levers back and forth

17 Critical Application ModelsThread LockerTorque Range (ft-lbs)Wheel motor bolts (Securing motor to support)Big/Small Stander, Stander X, Sport X,

18 71440008 - BLADE, FUSION, ½” OFFSET 16.5” 71440009 - BLADE, FUSION, ½”OFFSET 18" 71440010

Foreword Welcome to the progressive group of mowing professionals who use Wright mowers. We are focused on giving you advanced engineering and quali

19 P/N Description13990017 MACH BUSH, 7/8 ID X 1 3/8 OD X 14 GA13990024 WASHER, NEOPRENE14990002 HBUSH SMALL17460005 BUSHING, RUBBER, .75 X 1.125 X

20 MAINTENANCE ITEMENGINE ITEMSSEE NOTE BELOWFIRST 8 HOURSDAILYEVERY 25 HOURSEVERY 100 HOURSEVERY 200 HOURSEVERY 300 HOURSANNUALLYInspect for cracks

21 Date Maintenance/Service PerformedUnit HoursShop/TechnicianMaintenance Record

22 Manufacturing, Inc. (hereinafter: WMI) warrants to the original owner that the new WMI mower accompanying this document will be free fro

23 FEDERAL AND CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The United States Environmental Protection Agen

24 (2) Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period st

25 Problem Description Possible Cause SolutionStreaking is when strips of uncut grass are left behind. Blades are not sharp Sharpen bladesBlades a

24 76490090 DECAL, STANDER X 76490013 DECAL, MAIN INST. PANEL 76490005 DECAL, THROTTLE INSTRUCTIONS 76460001 DECAL, DANGER BLADE HAZARD 76490001

Notes:

TABLE OF CONTENTS PRE-DELIVERY SERVICE OF MOWER BY DEALER ...

Notes:

4600X Wedgewood Blvd Frederick, MD 21703 www.wrightmfg.com

3 PRE-DELIVERY SERVICE OF MOWER BY DEALER Before proceeding with the Pre-Delivery Service of your mower, please read the safety instructions manual

4  Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing vulnerable to possible thrown objects from und

5 SAFETY INSTRUCTIONS WRIGHT MOWER USERS & OWNERS: READ THIS MANUAL BEFORE USING PLEASE BE CAREFUL! Introduction This mower is built t

6 WARNING User Clothing DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long non-baggy pant

7 Initial Operating Safety Guidelines • Read and understand the warnings on the instrument panel of the mower. • Keep a firm hold on the station

8 Zero-Radius Turn Operation During zero-radius turns (when one mower wheel rotates backwards while the other rotates forward) drive extra slow